Pardi Plinko Plans

Quick Plinko Demonstration

The first step to any project is the planning phase. This is where we dump ideas, and put them into writing. This is our initial plan of the Pardi Plinko board.


Still a sketch at the moment, this is only a rendering of what we want the board to look like.

Materials
The required materials to create the planned board are as follows:
-A 48x25 inch piece of particle board, cardboard, or plywood [we will be using cardboard]
-A 48x25 inch piece of plexiglass
-About 50 sq inches of balsa wood
-At least 30 drywall screws, wooden pegs, or similar
-Standard poker chips [approx. 1.5 inches in diameter] to play.

The build will consist of using these materials to put together the plinko board.
The base will be made from the cardboard or wood piece. Screws or wooden pegs will be placed "isometrically" as with any plinko board. The balsa wood will be used to create boxes at the bottom where the chip will land, deciding the prize.